Gumax® gevelisolatie-montagesysteem in antraciet naadloos weggewerkt achter het muurprofiel.
The Gumax® facade insulation mounting system
The Gumax® facade insulation mounting system

Now from £ 549

A smart mounting system for your insulated exterior wall

Secure your Gumax® veranda to almost any wall cladding

With the Gumax®facade insulation mounting system, Gumax® verandas can be easily installed against a wall that has exterior insulation. The system bridges up to 250 mm of insulation and cladding, while preventing heat loss caused by thermal bridges. The matt anthracite colour (RAL 7016) matches the veranda perfectly, and the system remains largely out of sight thanks to its smart placement behind the wall profile. This mounting system perfectly complements modern building and insulation methods. 

Mounting on insulated exterior walls 

Use this system to install your Gumax® veranda even on walls with exterior insulation. 

Various types of wall cladding

The system is compatible with a wide range of wall finishes, such as brick slips, wooden slats, plaster or steel. 

Perfect match with Gumax® veranda

With its sleek fit and matching colour (RAL 7016), the system forms a seamless whole with Gumax® verandas. 

Modern house with Gumax® Facade insulation mounting system suitable for plaster, wood or stone finish up to 250 mm.

Smart construction

An increasing number of homes are equipped with exterior wall insulation. The Gumax® facade insulation mounting system provides the perfect solution for securely mounting a Gumax® veranda in such cases. The construction consists of: 

  • A rear carrier: mounted first against the wall, behind the wall profile.
  • A threaded rod: connects the rear carrier to the load-bearing inner wall and bridges the insulation and cladding.
  • Support structures measuring 110 × 60 mm: narrower profiles that are placed beneath the rear carrier, against the wall. The number of support structures depends on the selected width of your veranda.

Together with the supplied fastening materials, this ensures a sturdy and insulation-friendly installation of your Gumax® veranda without causing damage* to the wall or insulation. 

One system for multiple wall types

This mounting system makes it possible to bridge a distance of up to 250 mm between the load-bearing inner wall (200 kg per linear metre) and the exterior of the façade. It is suitable for many common situations, such as a concrete or solid brick wall with exterior finishes like wooden slats, plaster, steel or brick slips. As long as the total thickness of the insulation and cladding remains below 250 mm, the system offers a strong and reliable solution. 

Detailed view of the Gumax® Facade insulation mounting system with solid wall mounting behind insulation.
Mounting materials of the Gumax® Facade insulation mounting system with bolts, resin and anchor rods.

Sturdy installation without heat loss

You will receive a package with all necessary parts and fastening materials for a strong and stable installation. The included brush and air blower ensure optimal adhesion of the Fischer mortar, which firmly anchors the threaded rod into the load-bearing inner wall. Thanks to the thermal decoupling sleeves and plates, thermal bridges, areas where heat can easily escape, are effectively prevented within the wall. 

The facade insulation mounting system is available in standard widths of 3.06 m, 4.06 m, 5.06 m and 6.06 m. For verandas between 6.06 m and 12.06 m wide, you will receive a coupling pipe and plate to connect the rear carriers of the system. In addition, the package includes a step-by-step assembly manual to help you correctly install the system on your wall.

Fantastic product at great prices and great customer service

After shopping around we decided to purchase our glass veranda from TuinMaximaal and fit ourselves - we were so happy with the product - delivery was slightly longer than advertised but that didn’t matter as we were still meticulously getting our ground works done.
All arrived very well packaged and the instructions were used along with installation videos on the website.
We installed on the back of a flat roof extension and had to alter the guttering to get the 8 degree pitch for 3.5 m projection but all the prep worked out and installation was seamless.
We didn’t end up hiring a lift genie and instead used acrojacks and wood to protect the surface.
The glass panels were heavy 4m x3.5 and hubby and 3 friends managed to fit them in one hour ! 3 adults to fit the glass doors - it’s now complete water tight and looks amazing.
So so happy we went with this company as the quote we had received from a competitor who didn’t offer supply only was an extra £20,000!
We also purchased the draft weather strips - please note that if you want to use weather strips and handles the handles go on the other side to weather strip.

SR

I have recently received and installed…

I have recently received and installed a set of glass sliding doors from Tuimaximaal. My initial enquiry by telephone was handled by Danny in Eindhoven ( I am in the UK). That first contact was such a positive experience it made up my mind that if I was going to use this type of product then it would be from Tuinmaximaal. Danny was not in his first language but oh how I wish I could get this kind of service from a UK manufacturer, so positive, perceptive and professional. I placed my order and I simply could not fault any aspect, the service, the quality, the delivery all absolutely first class! Mike the delivery driver was a total star, what a totally professional, helpful and genuinely friendly guy. I have spoken to Luna, Sophia and Jesly for various reasons and in each case our conversations have been a delight! I could not recommend this company highly enough, they are exceptional. John Walls, West Sussex England.

John Walls (Qa3 Ltd)

Technical specifications

  • Dimensions

    Rear carrier

    • Widths: 3,06 m, 4,06 m, 5,06 m, 6,06 m. 7,06 m, 8,06, 9,06 m, 10,06 m, 11,06 m en 12,06 m.
    • Height:160 mm
    • Depth: 60 mm

    Support structures 

    • Widths: 110 mm
    • Height: 3052 mm
    • Depth: 60 mm

  • Colour

    RAL 7016 – Matt anthracite

  • Registrations

    Patented technology

  • Finish

  • Contents

    • Box A: coupling pipe, thermal decoupling plates and sleeves, extension nozzle, brush, air blower, fastening materials, assembly manual 
    • Box B: rear carrier, side plates, fastening materials 
    • Box C: support structures 110 mm × 60 mm, coupling plate, fastening materials 
    • Separate parts: threaded rod, Fischer injection mortar, injection sleeve, sealant 

  • Recycling

    Avoid environmental and health hazards by disposing of the product and its packaging materials properly.

The system for insulated exterior walls

  • Suitable for various types of insulation and wall finishes
  • Forms a seamless whole with anthracite Gumax® verandas
  • No heat loss thanks to thermal decoupling

Frequently asked questions

  • Does the total depth of the veranda increase?

  • Is it possible to install glass sliding doors with the facade insulation mounting system?

  • Is the anthracite colour the same as that of Gumax® verandas?

  • Is the system visible from the outside?

  • Can I move my outer support structures inward?

  • Is a load-bearing inner wall required?

  • Is the system suitable for an open façade construction?

  • What wind and snow limits apply when using the system?

*Do not install the product in situations where the exterior wall is loose or shows visible cracks to avoid damage to the wall.